Recycling machine
How to build waste plastic to oil machine:
Waste plastic to oil machine in our factory
Preparation of raw material:
The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details:
Separate the ingredient which cannot be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should dry it firstly. Methods as follows:
1. Dry in the sun: if you have enough area, you could dry the material in the sun. You should often stir it.
2. Squeeze water from material using a large power extruder.
3. Dry the material using a spin-drier.
Note: we can pyrolysis the wet raw material, but need much more time to pyrolysis.
If the raw material is waste tire and its diameter is over 1.4 meter, should cut the inner ring firstly.
Plastic to fuel oil flow chart
All-round service:
In accordance with the contract for the convenience of our customers, we design the WTE pyrolysis facility, supply the required equipment, supervise erection and commissioning, and perform personnel training.
- 1.High oil yield;no bad smell during process.
- 2.Enough safety systems;normal pressure.
- 3.Recycled tail gas to heating no waste emission.
- 4.Auto welding to ensure life, service life will be 8-10years.
- 5.Excellent service(pre-service,selling service,after-sale-service).
Help customer do project plan,including financial analysis.
Help customer finished
delivery,foundation,installation,trainning,commissioning and try
running.
One year warranty period .
If you are intrested in investment machine that turns plastic back into
oil ,or any other questions,such as project report,project cost,you can
leave a message in below form, we will back to you once we got your
message.
Leave a inquiry for machine that turns plastic back into oil:
