Pyrolysis plant
Pyrolysis of waste tires leads to the production of a solid carbon residue (char),a condensable fraction (pyro-oil) and gases. The percentage of each phase is influenced by process conditions, such as temperature, pressure, heating rate,particle sizes, heat exchange system, catalysis etc. Pyrolysing waste tire at a temperature between 300 and 720 C and heating rates 5 and 80 C min found that the maximum conversion of tire occurred at a temperature of 600 C found that the temperature does not significantly influence the char and gas yields over 500 C. However, temperature variations influence the gas composition pyrolysed cross-section samples (2-3 cm wide), representative of whole tire, at 300-700 C. Tire-pyrolysis liquids are a complex mixture of hydrocarbons, which contains 0.4% of N and 1.2% of S.
Tire pyrolysis
- 1.High oil yield;no bad smell during process.
- 2.Enough safety systems;normal pressure.
- 3.Recycled tail gas to heating no waste emission.
- 4.Auto welding to ensure life, service life will be 8-10years.
- 5.Excellent service(pre-service,selling service,after-sale-service).
Help customer do project plan,including financial analysis.
Help customer finished
delivery,foundation,installation,trainning,commissioning and try
running.
One year warranty period .
If you are intrested in investment machine that turns plastic back into
oil ,or any other questions,such as project report,project cost,you can
leave a message in below form, we will back to you once we got your
message.
Leave a inquiry for machine that turns plastic back into oil:
